EVE-NG를 사용해 가상 NW 환경을 준비한다～3.처음의 라우팅편～
소개
원래는 남길 생각은 없었지만
도하 마리가 전혀 작동하지 않는 다른 세그먼트 사이
소통이 생겼기 때문에 그 때의 설정을 기념으로 남긴다.
먼저 결론
써 버리면 보통으로 보이지만… 이것이 원인이었다.
・PC단말에 디폴트 게이트웨이를 설정했다
· L2SW에 기본 경로를 설정했습니다.
우~응, 조금 부끄럽다.
실제 구성
이미지적으로는
L3SW×2를 사용하여 2개의 LAN 세그먼트, 1개의 중간 세그먼트를 이미지하여 만들었다.
또한 L3SW의 아래에 L2SW를 하나 끼워 말단에 PC 단말을 설치했다. 
각 SW의 IOS는 ... 아래 표 참조
종류
터미널 이름
사용한 이미지 파일
L3SW
L3_10_0_0_[11,12]
L3-ADVENTERPRISEK9-M-15.5-2T.bin
L2SW
SW_192_168_[0,1]_10
L2-ADVENTERPRISE-M-15.1-20130726.bin
PC 터미널
VPC_192_168_[0,1]_100
Virtual PC(VPCS)
실제 설정
우선 전부 내보내기
L3_10_0_0_11Router#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 10.0.0.0/24 is directly connected, Ethernet0/1
L 10.0.0.11/32 is directly connected, Ethernet0/1
192.168.0.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.0.0/24 is directly connected, Ethernet0/0
L 192.168.0.1/32 is directly connected, Ethernet0/0
S 192.168.1.0/24 [1/0] via 10.0.0.12
Router#show run
Building configuration...
Current configuration : 1075 bytes
!
! Last configuration change at 01:18:25 EET Thu Sep 19 2019
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
!
bsd-client server url https://cloudsso.cisco.com/as/token.oauth2
clock timezone EET 2 0
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
cts logging verbose
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
ip address 192.168.0.1 255.255.255.0
!
interface Ethernet0/1
ip address 10.0.0.11 255.255.255.0
!
interface Ethernet0/2
no ip address
shutdown
!
interface Ethernet0/3
no ip address
shutdown
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 192.168.1.0 255.255.255.0 10.0.0.12
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
login
transport input none
!
!
end
Router#
SW_192_168_0_10SW-1#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
+ - replicated route, % - next hop override
Gateway of last resort is 192.168.0.1 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 192.168.0.1
192.168.0.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.0.0/24 is directly connected, Vlan1
L 192.168.0.10/32 is directly connected, Vlan1
SW-1#show run
Building configuration...
Current configuration : 827 bytes
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname SW-1
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
clock timezone EET 2 0
!
ip cef
!
!
no ipv6 cef
ipv6 multicast rpf use-bgp
!
!
!
!
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
!
!
!
vlan internal allocation policy ascending
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
duplex auto
!
interface Ethernet0/1
duplex auto
!
interface Ethernet0/2
duplex auto
!
interface Ethernet0/3
duplex auto
!
interface Vlan1
ip address 192.168.0.10 255.255.255.0
!
ip default-gateway 192.168.0.1
!
no ip http server
!
ip route 0.0.0.0 0.0.0.0 192.168.0.1
!
!
!
!
control-plane
!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
login
!
end
SW-1#
PC_192_168_0_100
Welcome to Virtual PC Simulator, version 1.0 (0.8c)
Dedicated to Daling.
Build time: Dec 31 2016 01:22:17
Copyright (c) 2007-2015, Paul Meng ([email protected])
All rights reserved.
VPCS is free software, distributed under the terms of the "BSD" licence.
Source code and license can be found at vpcs.sf.net.
For more information, please visit wiki.freecode.com.cn.
Modified version supporting unetlab by unetlab team
Press '?' to get help.
Executing the startup file
Checking for duplicate address...
PC1 : 192.168.0.100 255.255.255.0 gateway 192.168.0.1
PC-1> show ip
NAME : PC-1[1]
IP/MASK : 192.168.0.100/24
GATEWAY : 192.168.0.1
DNS :
MAC : 00:50:79:66:68:05
LPORT : 20000
RHOST:PORT : 127.0.0.1:30000
MTU : 1500
PC-1>
L3_10_0_0_12Router#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 10.0.0.0/24 is directly connected, Ethernet0/0
L 10.0.0.12/32 is directly connected, Ethernet0/0
S 192.168.0.0/24 [1/0] via 10.0.0.11
192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.1.0/24 is directly connected, Ethernet0/1
L 192.168.1.1/32 is directly connected, Ethernet0/1
Router#ter len 0
Router#show run
Building configuration...
Current configuration : 1065 bytes
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
!
bsd-client server url https://cloudsso.cisco.com/as/token.oauth2
clock timezone EET 2 0
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
cts logging verbose
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
ip address 10.0.0.12 255.255.255.0
!
interface Ethernet0/1
ip address 192.168.1.1 255.255.255.0
!
interface Ethernet0/2
no ip address
shutdown
!
interface Ethernet0/3
no ip address
shutdown
!
router rip
network 10.0.0.0
network 192.168.1.0
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 192.168.0.0 255.255.255.0 10.0.0.11
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
login
transport input none
!
!
end
Router#copy run start
Destination filename [startup-config]?
Building configuration...
[OK]
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#no router
Router(config)#no router rip
Router(config)#^Z
Router#te
*Sep 18 23:19:17.610: %SYS-5-CONFIG_I: Configured from console by console
Router#ter len 0
Router#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 10.0.0.0/24 is directly connected, Ethernet0/0
L 10.0.0.12/32 is directly connected, Ethernet0/0
S 192.168.0.0/24 [1/0] via 10.0.0.11
192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.1.0/24 is directly connected, Ethernet0/1
L 192.168.1.1/32 is directly connected, Ethernet0/1
Router#show run
Building configuration...
Current configuration : 1075 bytes
!
! Last configuration change at 01:19:17 EET Thu Sep 19 2019
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
!
bsd-client server url https://cloudsso.cisco.com/as/token.oauth2
clock timezone EET 2 0
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
cts logging verbose
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
ip address 10.0.0.12 255.255.255.0
!
interface Ethernet0/1
ip address 192.168.1.1 255.255.255.0
!
interface Ethernet0/2
no ip address
shutdown
!
interface Ethernet0/3
no ip address
shutdown
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 192.168.0.0 255.255.255.0 10.0.0.11
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
login
transport input none
!
!
end
Router#
SW_192_168_1_10SW-2#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
+ - replicated route, % - next hop override
Gateway of last resort is 192.168.1.1 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 192.168.1.1
192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.1.0/24 is directly connected, Vlan1
L 192.168.1.10/32 is directly connected, Vlan1
SW-2#copy run start
Destination filename [startup-config]?
Building configuration...
Compressed configuration from 936 bytes to 636 bytes[OK]
SW-2#ter len 0
SW-2#show run
Building configuration...
Current configuration : 936 bytes
!
! Last configuration change at 01:14:41 EET Thu Sep 19 2019
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname SW-2
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
clock timezone EET 2 0
!
ip cef
!
!
no ipv6 cef
ipv6 multicast rpf use-bgp
!
!
!
!
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
!
!
!
vlan internal allocation policy ascending
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
duplex auto
!
interface Ethernet0/1
duplex auto
!
interface Ethernet0/2
duplex auto
!
interface Ethernet0/3
duplex auto
!
interface Vlan1
ip address 192.168.1.10 255.255.255.0
!
ip default-gateway 192.168.1.1
!
no ip http server
!
ip route 0.0.0.0 0.0.0.0 192.168.1.1
ip route 192.168.1.0 255.255.255.0 192.168.0.1
!
!
!
!
control-plane
!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
login
!
end
SW-2#
PC_192_168_1_100
Welcome to Virtual PC Simulator, version 1.0 (0.8c)
Dedicated to Daling.
Build time: Dec 31 2016 01:22:17
Copyright (c) 2007-2015, Paul Meng ([email protected])
All rights reserved.
VPCS is free software, distributed under the terms of the "BSD" licence.
Source code and license can be found at vpcs.sf.net.
For more information, please visit wiki.freecode.com.cn.
Modified version supporting unetlab by unetlab team
Press '?' to get help.
Executing the startup file
Checking for duplicate address...
PC1 : 192.168.1.100 255.255.255.0 gateway 192.168.1.10
VPCS> show ip
NAME : VPCS[1]
IP/MASK : 192.168.1.100/24
GATEWAY : 192.168.1.10
DNS :
MAC : 00:50:79:66:68:08
LPORT : 20000
RHOST:PORT : 127.0.0.1:30000
MTU : 1500
VPCS>
이것으로 설정을 모르게 되어 다시 하게 되어도 되돌릴 수 있을 듯.
Reference
이 문제에 관하여(EVE-NG를 사용해 가상 NW 환경을 준비한다～3.처음의 라우팅편～), 우리는 이곳에서 더 많은 자료를 발견하고 링크를 클릭하여 보았다
https://qiita.com/watyanabe164/items/ef3a9974216bfd09e6e7
텍스트를 자유롭게 공유하거나 복사할 수 있습니다.하지만 이 문서의 URL은 참조 URL로 남겨 두십시오.
우수한 개발자 콘텐츠 발견에 전념
(Collection and Share based on the CC Protocol.)
써 버리면 보통으로 보이지만… 이것이 원인이었다.
・PC단말에 디폴트 게이트웨이를 설정했다
· L2SW에 기본 경로를 설정했습니다.
우~응, 조금 부끄럽다.
실제 구성
이미지적으로는
L3SW×2를 사용하여 2개의 LAN 세그먼트, 1개의 중간 세그먼트를 이미지하여 만들었다.
또한 L3SW의 아래에 L2SW를 하나 끼워 말단에 PC 단말을 설치했다.
각 SW의 IOS는 ... 아래 표 참조
종류
터미널 이름
사용한 이미지 파일
L3SW
L3_10_0_0_[11,12]
L3-ADVENTERPRISEK9-M-15.5-2T.bin
L2SW
SW_192_168_[0,1]_10
L2-ADVENTERPRISE-M-15.1-20130726.bin
PC 터미널
VPC_192_168_[0,1]_100
Virtual PC(VPCS)
실제 설정
우선 전부 내보내기
L3_10_0_0_11Router#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 10.0.0.0/24 is directly connected, Ethernet0/1
L 10.0.0.11/32 is directly connected, Ethernet0/1
192.168.0.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.0.0/24 is directly connected, Ethernet0/0
L 192.168.0.1/32 is directly connected, Ethernet0/0
S 192.168.1.0/24 [1/0] via 10.0.0.12
Router#show run
Building configuration...
Current configuration : 1075 bytes
!
! Last configuration change at 01:18:25 EET Thu Sep 19 2019
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
!
bsd-client server url https://cloudsso.cisco.com/as/token.oauth2
clock timezone EET 2 0
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
cts logging verbose
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
ip address 192.168.0.1 255.255.255.0
!
interface Ethernet0/1
ip address 10.0.0.11 255.255.255.0
!
interface Ethernet0/2
no ip address
shutdown
!
interface Ethernet0/3
no ip address
shutdown
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 192.168.1.0 255.255.255.0 10.0.0.12
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
login
transport input none
!
!
end
Router#
SW_192_168_0_10SW-1#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
+ - replicated route, % - next hop override
Gateway of last resort is 192.168.0.1 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 192.168.0.1
192.168.0.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.0.0/24 is directly connected, Vlan1
L 192.168.0.10/32 is directly connected, Vlan1
SW-1#show run
Building configuration...
Current configuration : 827 bytes
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname SW-1
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
clock timezone EET 2 0
!
ip cef
!
!
no ipv6 cef
ipv6 multicast rpf use-bgp
!
!
!
!
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
!
!
!
vlan internal allocation policy ascending
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
duplex auto
!
interface Ethernet0/1
duplex auto
!
interface Ethernet0/2
duplex auto
!
interface Ethernet0/3
duplex auto
!
interface Vlan1
ip address 192.168.0.10 255.255.255.0
!
ip default-gateway 192.168.0.1
!
no ip http server
!
ip route 0.0.0.0 0.0.0.0 192.168.0.1
!
!
!
!
control-plane
!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
login
!
end
SW-1#
PC_192_168_0_100
Welcome to Virtual PC Simulator, version 1.0 (0.8c)
Dedicated to Daling.
Build time: Dec 31 2016 01:22:17
Copyright (c) 2007-2015, Paul Meng ([email protected])
All rights reserved.
VPCS is free software, distributed under the terms of the "BSD" licence.
Source code and license can be found at vpcs.sf.net.
For more information, please visit wiki.freecode.com.cn.
Modified version supporting unetlab by unetlab team
Press '?' to get help.
Executing the startup file
Checking for duplicate address...
PC1 : 192.168.0.100 255.255.255.0 gateway 192.168.0.1
PC-1> show ip
NAME : PC-1[1]
IP/MASK : 192.168.0.100/24
GATEWAY : 192.168.0.1
DNS :
MAC : 00:50:79:66:68:05
LPORT : 20000
RHOST:PORT : 127.0.0.1:30000
MTU : 1500
PC-1>
L3_10_0_0_12Router#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 10.0.0.0/24 is directly connected, Ethernet0/0
L 10.0.0.12/32 is directly connected, Ethernet0/0
S 192.168.0.0/24 [1/0] via 10.0.0.11
192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.1.0/24 is directly connected, Ethernet0/1
L 192.168.1.1/32 is directly connected, Ethernet0/1
Router#ter len 0
Router#show run
Building configuration...
Current configuration : 1065 bytes
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
!
bsd-client server url https://cloudsso.cisco.com/as/token.oauth2
clock timezone EET 2 0
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
cts logging verbose
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
ip address 10.0.0.12 255.255.255.0
!
interface Ethernet0/1
ip address 192.168.1.1 255.255.255.0
!
interface Ethernet0/2
no ip address
shutdown
!
interface Ethernet0/3
no ip address
shutdown
!
router rip
network 10.0.0.0
network 192.168.1.0
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 192.168.0.0 255.255.255.0 10.0.0.11
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
login
transport input none
!
!
end
Router#copy run start
Destination filename [startup-config]?
Building configuration...
[OK]
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#no router
Router(config)#no router rip
Router(config)#^Z
Router#te
*Sep 18 23:19:17.610: %SYS-5-CONFIG_I: Configured from console by console
Router#ter len 0
Router#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 10.0.0.0/24 is directly connected, Ethernet0/0
L 10.0.0.12/32 is directly connected, Ethernet0/0
S 192.168.0.0/24 [1/0] via 10.0.0.11
192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.1.0/24 is directly connected, Ethernet0/1
L 192.168.1.1/32 is directly connected, Ethernet0/1
Router#show run
Building configuration...
Current configuration : 1075 bytes
!
! Last configuration change at 01:19:17 EET Thu Sep 19 2019
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
!
bsd-client server url https://cloudsso.cisco.com/as/token.oauth2
clock timezone EET 2 0
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
cts logging verbose
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
ip address 10.0.0.12 255.255.255.0
!
interface Ethernet0/1
ip address 192.168.1.1 255.255.255.0
!
interface Ethernet0/2
no ip address
shutdown
!
interface Ethernet0/3
no ip address
shutdown
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 192.168.0.0 255.255.255.0 10.0.0.11
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
login
transport input none
!
!
end
Router#
SW_192_168_1_10SW-2#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
+ - replicated route, % - next hop override
Gateway of last resort is 192.168.1.1 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 192.168.1.1
192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.1.0/24 is directly connected, Vlan1
L 192.168.1.10/32 is directly connected, Vlan1
SW-2#copy run start
Destination filename [startup-config]?
Building configuration...
Compressed configuration from 936 bytes to 636 bytes[OK]
SW-2#ter len 0
SW-2#show run
Building configuration...
Current configuration : 936 bytes
!
! Last configuration change at 01:14:41 EET Thu Sep 19 2019
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname SW-2
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
clock timezone EET 2 0
!
ip cef
!
!
no ipv6 cef
ipv6 multicast rpf use-bgp
!
!
!
!
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
!
!
!
vlan internal allocation policy ascending
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
duplex auto
!
interface Ethernet0/1
duplex auto
!
interface Ethernet0/2
duplex auto
!
interface Ethernet0/3
duplex auto
!
interface Vlan1
ip address 192.168.1.10 255.255.255.0
!
ip default-gateway 192.168.1.1
!
no ip http server
!
ip route 0.0.0.0 0.0.0.0 192.168.1.1
ip route 192.168.1.0 255.255.255.0 192.168.0.1
!
!
!
!
control-plane
!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
login
!
end
SW-2#
PC_192_168_1_100
Welcome to Virtual PC Simulator, version 1.0 (0.8c)
Dedicated to Daling.
Build time: Dec 31 2016 01:22:17
Copyright (c) 2007-2015, Paul Meng ([email protected])
All rights reserved.
VPCS is free software, distributed under the terms of the "BSD" licence.
Source code and license can be found at vpcs.sf.net.
For more information, please visit wiki.freecode.com.cn.
Modified version supporting unetlab by unetlab team
Press '?' to get help.
Executing the startup file
Checking for duplicate address...
PC1 : 192.168.1.100 255.255.255.0 gateway 192.168.1.10
VPCS> show ip
NAME : VPCS[1]
IP/MASK : 192.168.1.100/24
GATEWAY : 192.168.1.10
DNS :
MAC : 00:50:79:66:68:08
LPORT : 20000
RHOST:PORT : 127.0.0.1:30000
MTU : 1500
VPCS>
이것으로 설정을 모르게 되어 다시 하게 되어도 되돌릴 수 있을 듯.
Reference
이 문제에 관하여(EVE-NG를 사용해 가상 NW 환경을 준비한다～3.처음의 라우팅편～), 우리는 이곳에서 더 많은 자료를 발견하고 링크를 클릭하여 보았다
https://qiita.com/watyanabe164/items/ef3a9974216bfd09e6e7
텍스트를 자유롭게 공유하거나 복사할 수 있습니다.하지만 이 문서의 URL은 참조 URL로 남겨 두십시오.
우수한 개발자 콘텐츠 발견에 전념
(Collection and Share based on the CC Protocol.)
우선 전부 내보내기
L3_10_0_0_11
Router#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 10.0.0.0/24 is directly connected, Ethernet0/1
L 10.0.0.11/32 is directly connected, Ethernet0/1
192.168.0.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.0.0/24 is directly connected, Ethernet0/0
L 192.168.0.1/32 is directly connected, Ethernet0/0
S 192.168.1.0/24 [1/0] via 10.0.0.12
Router#show run
Building configuration...
Current configuration : 1075 bytes
!
! Last configuration change at 01:18:25 EET Thu Sep 19 2019
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
!
bsd-client server url https://cloudsso.cisco.com/as/token.oauth2
clock timezone EET 2 0
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
cts logging verbose
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
ip address 192.168.0.1 255.255.255.0
!
interface Ethernet0/1
ip address 10.0.0.11 255.255.255.0
!
interface Ethernet0/2
no ip address
shutdown
!
interface Ethernet0/3
no ip address
shutdown
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 192.168.1.0 255.255.255.0 10.0.0.12
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
login
transport input none
!
!
end
Router#
SW_192_168_0_10
SW-1#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
+ - replicated route, % - next hop override
Gateway of last resort is 192.168.0.1 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 192.168.0.1
192.168.0.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.0.0/24 is directly connected, Vlan1
L 192.168.0.10/32 is directly connected, Vlan1
SW-1#show run
Building configuration...
Current configuration : 827 bytes
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname SW-1
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
clock timezone EET 2 0
!
ip cef
!
!
no ipv6 cef
ipv6 multicast rpf use-bgp
!
!
!
!
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
!
!
!
vlan internal allocation policy ascending
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
duplex auto
!
interface Ethernet0/1
duplex auto
!
interface Ethernet0/2
duplex auto
!
interface Ethernet0/3
duplex auto
!
interface Vlan1
ip address 192.168.0.10 255.255.255.0
!
ip default-gateway 192.168.0.1
!
no ip http server
!
ip route 0.0.0.0 0.0.0.0 192.168.0.1
!
!
!
!
control-plane
!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
login
!
end
SW-1#
PC_192_168_0_100
Welcome to Virtual PC Simulator, version 1.0 (0.8c)
Dedicated to Daling.
Build time: Dec 31 2016 01:22:17
Copyright (c) 2007-2015, Paul Meng ([email protected])
All rights reserved.
VPCS is free software, distributed under the terms of the "BSD" licence.
Source code and license can be found at vpcs.sf.net.
For more information, please visit wiki.freecode.com.cn.
Modified version supporting unetlab by unetlab team
Press '?' to get help.
Executing the startup file
Checking for duplicate address...
PC1 : 192.168.0.100 255.255.255.0 gateway 192.168.0.1
PC-1> show ip
NAME : PC-1[1]
IP/MASK : 192.168.0.100/24
GATEWAY : 192.168.0.1
DNS :
MAC : 00:50:79:66:68:05
LPORT : 20000
RHOST:PORT : 127.0.0.1:30000
MTU : 1500
PC-1>
L3_10_0_0_12
Router#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 10.0.0.0/24 is directly connected, Ethernet0/0
L 10.0.0.12/32 is directly connected, Ethernet0/0
S 192.168.0.0/24 [1/0] via 10.0.0.11
192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.1.0/24 is directly connected, Ethernet0/1
L 192.168.1.1/32 is directly connected, Ethernet0/1
Router#ter len 0
Router#show run
Building configuration...
Current configuration : 1065 bytes
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
!
bsd-client server url https://cloudsso.cisco.com/as/token.oauth2
clock timezone EET 2 0
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
cts logging verbose
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
ip address 10.0.0.12 255.255.255.0
!
interface Ethernet0/1
ip address 192.168.1.1 255.255.255.0
!
interface Ethernet0/2
no ip address
shutdown
!
interface Ethernet0/3
no ip address
shutdown
!
router rip
network 10.0.0.0
network 192.168.1.0
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 192.168.0.0 255.255.255.0 10.0.0.11
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
login
transport input none
!
!
end
Router#copy run start
Destination filename [startup-config]?
Building configuration...
[OK]
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#no router
Router(config)#no router rip
Router(config)#^Z
Router#te
*Sep 18 23:19:17.610: %SYS-5-CONFIG_I: Configured from console by console
Router#ter len 0
Router#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 10.0.0.0/24 is directly connected, Ethernet0/0
L 10.0.0.12/32 is directly connected, Ethernet0/0
S 192.168.0.0/24 [1/0] via 10.0.0.11
192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.1.0/24 is directly connected, Ethernet0/1
L 192.168.1.1/32 is directly connected, Ethernet0/1
Router#show run
Building configuration...
Current configuration : 1075 bytes
!
! Last configuration change at 01:19:17 EET Thu Sep 19 2019
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
!
bsd-client server url https://cloudsso.cisco.com/as/token.oauth2
clock timezone EET 2 0
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
cts logging verbose
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
ip address 10.0.0.12 255.255.255.0
!
interface Ethernet0/1
ip address 192.168.1.1 255.255.255.0
!
interface Ethernet0/2
no ip address
shutdown
!
interface Ethernet0/3
no ip address
shutdown
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 192.168.0.0 255.255.255.0 10.0.0.11
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
login
transport input none
!
!
end
Router#
SW_192_168_1_10
SW-2#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
+ - replicated route, % - next hop override
Gateway of last resort is 192.168.1.1 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 192.168.1.1
192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.1.0/24 is directly connected, Vlan1
L 192.168.1.10/32 is directly connected, Vlan1
SW-2#copy run start
Destination filename [startup-config]?
Building configuration...
Compressed configuration from 936 bytes to 636 bytes[OK]
SW-2#ter len 0
SW-2#show run
Building configuration...
Current configuration : 936 bytes
!
! Last configuration change at 01:14:41 EET Thu Sep 19 2019
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname SW-2
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
clock timezone EET 2 0
!
ip cef
!
!
no ipv6 cef
ipv6 multicast rpf use-bgp
!
!
!
!
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
!
!
!
vlan internal allocation policy ascending
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
duplex auto
!
interface Ethernet0/1
duplex auto
!
interface Ethernet0/2
duplex auto
!
interface Ethernet0/3
duplex auto
!
interface Vlan1
ip address 192.168.1.10 255.255.255.0
!
ip default-gateway 192.168.1.1
!
no ip http server
!
ip route 0.0.0.0 0.0.0.0 192.168.1.1
ip route 192.168.1.0 255.255.255.0 192.168.0.1
!
!
!
!
control-plane
!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
login
!
end
SW-2#
PC_192_168_1_100
Welcome to Virtual PC Simulator, version 1.0 (0.8c)
Dedicated to Daling.
Build time: Dec 31 2016 01:22:17
Copyright (c) 2007-2015, Paul Meng ([email protected])
All rights reserved.
VPCS is free software, distributed under the terms of the "BSD" licence.
Source code and license can be found at vpcs.sf.net.
For more information, please visit wiki.freecode.com.cn.
Modified version supporting unetlab by unetlab team
Press '?' to get help.
Executing the startup file
Checking for duplicate address...
PC1 : 192.168.1.100 255.255.255.0 gateway 192.168.1.10
VPCS> show ip
NAME : VPCS[1]
IP/MASK : 192.168.1.100/24
GATEWAY : 192.168.1.10
DNS :
MAC : 00:50:79:66:68:08
LPORT : 20000
RHOST:PORT : 127.0.0.1:30000
MTU : 1500
VPCS>
이것으로 설정을 모르게 되어 다시 하게 되어도 되돌릴 수 있을 듯.
Reference
이 문제에 관하여(EVE-NG를 사용해 가상 NW 환경을 준비한다～3.처음의 라우팅편～), 우리는 이곳에서 더 많은 자료를 발견하고 링크를 클릭하여 보았다 https://qiita.com/watyanabe164/items/ef3a9974216bfd09e6e7텍스트를 자유롭게 공유하거나 복사할 수 있습니다.하지만 이 문서의 URL은 참조 URL로 남겨 두십시오.
우수한 개발자 콘텐츠 발견에 전념
(Collection and Share based on the CC Protocol.)
좋은 웹페이지 즐겨찾기
