des 와 3des 의 javascript 구현
아래 의 이 소스 코드 들 은 모두 tero. co. uk 사이트 에서 나온다.자 바스 크 립 트 가 비트 단위 로 작 동 하 는 DES (데이터 암호 화 표준) 암호 화 알고리즘 을 포함 하고 있다.ECB (Electronic Code Book) 와 CBC (암호 블록 링크 (Cipher Block Chaining) 를 지원 하 며 3DES 알고리즘 과 3des 방법 에 대한 패 키 징 을 포함 하여 PKCS 7 padding 의 잘못된 이해 에 대해 작성 자 와 설명 하 였 습 니 다.
function des (key, message, encrypt, mode, iv, padding) {
//declaring this locally speeds things up a bit
var spfunction1 = new Array (0x1010400,0,0x10000,0x1010404,0x1010004,0x10404,0x4,0x10000,0x400,0x1010400,0x1010404,0x400,0x1000404,0x1010004,0x1000000,0x4,0x404,0x1000400,0x1000400,0x10400,0x10400,0x1010000,0x1010000,0x1000404,0x10004,0x1000004,0x1000004,0x10004,0,0x404,0x10404,0x1000000,0x10000,0x1010404,0x4,0x1010000,0x1010400,0x1000000,0x1000000,0x400,0x1010004,0x10000,0x10400,0x1000004,0x400,0x4,0x1000404,0x10404,0x1010404,0x10004,0x1010000,0x1000404,0x1000004,0x404,0x10404,0x1010400,0x404,0x1000400,0x1000400,0,0x10004,0x10400,0,0x1010004);
var spfunction2 = new Array (-0x7fef7fe0,-0x7fff8000,0x8000,0x108020,0x100000,0x20,-0x7fefffe0,-0x7fff7fe0,-0x7fffffe0,-0x7fef7fe0,-0x7fef8000,-0x80000000,-0x7fff8000,0x100000,0x20,-0x7fefffe0,0x108000,0x100020,-0x7fff7fe0,0,-0x80000000,0x8000,0x108020,-0x7ff00000,0x100020,-0x7fffffe0,0,0x108000,0x8020,-0x7fef8000,-0x7ff00000,0x8020,0,0x108020,-0x7fefffe0,0x100000,-0x7fff7fe0,-0x7ff00000,-0x7fef8000,0x8000,-0x7ff00000,-0x7fff8000,0x20,-0x7fef7fe0,0x108020,0x20,0x8000,-0x80000000,0x8020,-0x7fef8000,0x100000,-0x7fffffe0,0x100020,-0x7fff7fe0,-0x7fffffe0,0x100020,0x108000,0,-0x7fff8000,0x8020,-0x80000000,-0x7fefffe0,-0x7fef7fe0,0x108000);
var spfunction3 = new Array (0x208,0x8020200,0,0x8020008,0x8000200,0,0x20208,0x8000200,0x20008,0x8000008,0x8000008,0x20000,0x8020208,0x20008,0x8020000,0x208,0x8000000,0x8,0x8020200,0x200,0x20200,0x8020000,0x8020008,0x20208,0x8000208,0x20200,0x20000,0x8000208,0x8,0x8020208,0x200,0x8000000,0x8020200,0x8000000,0x20008,0x208,0x20000,0x8020200,0x8000200,0,0x200,0x20008,0x8020208,0x8000200,0x8000008,0x200,0,0x8020008,0x8000208,0x20000,0x8000000,0x8020208,0x8,0x20208,0x20200,0x8000008,0x8020000,0x8000208,0x208,0x8020000,0x20208,0x8,0x8020008,0x20200);
var spfunction4 = new Array (0x802001,0x2081,0x2081,0x80,0x802080,0x800081,0x800001,0x2001,0,0x802000,0x802000,0x802081,0x81,0,0x800080,0x800001,0x1,0x2000,0x800000,0x802001,0x80,0x800000,0x2001,0x2080,0x800081,0x1,0x2080,0x800080,0x2000,0x802080,0x802081,0x81,0x800080,0x800001,0x802000,0x802081,0x81,0,0,0x802000,0x2080,0x800080,0x800081,0x1,0x802001,0x2081,0x2081,0x80,0x802081,0x81,0x1,0x2000,0x800001,0x2001,0x802080,0x800081,0x2001,0x2080,0x800000,0x802001,0x80,0x800000,0x2000,0x802080);
var spfunction5 = new Array (0x100,0x2080100,0x2080000,0x42000100,0x80000,0x100,0x40000000,0x2080000,0x40080100,0x80000,0x2000100,0x40080100,0x42000100,0x42080000,0x80100,0x40000000,0x2000000,0x40080000,0x40080000,0,0x40000100,0x42080100,0x42080100,0x2000100,0x42080000,0x40000100,0,0x42000000,0x2080100,0x2000000,0x42000000,0x80100,0x80000,0x42000100,0x100,0x2000000,0x40000000,0x2080000,0x42000100,0x40080100,0x2000100,0x40000000,0x42080000,0x2080100,0x40080100,0x100,0x2000000,0x42080000,0x42080100,0x80100,0x42000000,0x42080100,0x2080000,0,0x40080000,0x42000000,0x80100,0x2000100,0x40000100,0x80000,0,0x40080000,0x2080100,0x40000100);
var spfunction6 = new Array (0x20000010,0x20400000,0x4000,0x20404010,0x20400000,0x10,0x20404010,0x400000,0x20004000,0x404010,0x400000,0x20000010,0x400010,0x20004000,0x20000000,0x4010,0,0x400010,0x20004010,0x4000,0x404000,0x20004010,0x10,0x20400010,0x20400010,0,0x404010,0x20404000,0x4010,0x404000,0x20404000,0x20000000,0x20004000,0x10,0x20400010,0x404000,0x20404010,0x400000,0x4010,0x20000010,0x400000,0x20004000,0x20000000,0x4010,0x20000010,0x20404010,0x404000,0x20400000,0x404010,0x20404000,0,0x20400010,0x10,0x4000,0x20400000,0x404010,0x4000,0x400010,0x20004010,0,0x20404000,0x20000000,0x400010,0x20004010);
var spfunction7 = new Array (0x200000,0x4200002,0x4000802,0,0x800,0x4000802,0x200802,0x4200800,0x4200802,0x200000,0,0x4000002,0x2,0x4000000,0x4200002,0x802,0x4000800,0x200802,0x200002,0x4000800,0x4000002,0x4200000,0x4200800,0x200002,0x4200000,0x800,0x802,0x4200802,0x200800,0x2,0x4000000,0x200800,0x4000000,0x200800,0x200000,0x4000802,0x4000802,0x4200002,0x4200002,0x2,0x200002,0x4000000,0x4000800,0x200000,0x4200800,0x802,0x200802,0x4200800,0x802,0x4000002,0x4200802,0x4200000,0x200800,0,0x2,0x4200802,0,0x200802,0x4200000,0x800,0x4000002,0x4000800,0x800,0x200002);
var spfunction8 = new Array (0x10001040,0x1000,0x40000,0x10041040,0x10000000,0x10001040,0x40,0x10000000,0x40040,0x10040000,0x10041040,0x41000,0x10041000,0x41040,0x1000,0x40,0x10040000,0x10000040,0x10001000,0x1040,0x41000,0x40040,0x10040040,0x10041000,0x1040,0,0,0x10040040,0x10000040,0x10001000,0x41040,0x40000,0x41040,0x40000,0x10041000,0x1000,0x40,0x10040040,0x1000,0x41040,0x10001000,0x40,0x10000040,0x10040000,0x10040040,0x10000000,0x40000,0x10001040,0,0x10041040,0x40040,0x10000040,0x10040000,0x10001000,0x10001040,0,0x10041040,0x41000,0x41000,0x1040,0x1040,0x40040,0x10000000,0x10041000);
//create the 16 or 48 subkeys we will need
var keys = des_createKeys (key);
var m=0, i, j, temp, temp2, right1, right2, left, right, looping;
var cbcleft, cbcleft2, cbcright, cbcright2
var endloop, loopinc;
var len = message.length;
var chunk = 0;
//set up the loops for single and triple des
var iterations = keys.length == 32 ? 3 : 9; //single or triple des
if (iterations == 3) {
looping = encrypt ? new Array (0, 32, 2) : new Array (30, -2, -2);
}
else {
looping = encrypt ? new Array (0, 32, 2, 62, 30, -2, 64, 96, 2) : new Array (94, 62, -2, 32, 64, 2, 30, -2, -2);
}
//pad the message depending on the padding parameter
if (padding == 2)
message += " "; //pad the message with spaces
else if (padding == 1) {
temp = 8-(len%8); message += String.fromCharCode (temp,temp,temp,temp,temp,temp,temp,temp);
if (temp==8)
len+=8;
} //PKCS7 padding PKCS5 padding, PKCS5 8 ， PKCS7
else if (!padding)
message += "\0\0\0\0\0\0\0\0"; //pad the message out with null bytes
//store the result here
result = "";
tempresult = "";
if (mode == 1) { //CBC mode
cbcleft = (iv.charCodeAt(m++) << 24) | (iv.charCodeAt(m++) << 16) | (iv.charCodeAt(m++) << 8) | iv.charCodeAt(m++);
cbcright = (iv.charCodeAt(m++) << 24) | (iv.charCodeAt(m++) << 16) | (iv.charCodeAt(m++) << 8) | iv.charCodeAt(m++);
m=0;
}
//loop through each 64 bit chunk of the message
while (m < len) {
left = (message.charCodeAt(m++) << 24) | (message.charCodeAt(m++) << 16) | (message.charCodeAt(m++) << 8) | message.charCodeAt(m++);
right = (message.charCodeAt(m++) << 24) | (message.charCodeAt(m++) << 16) | (message.charCodeAt(m++) << 8) | message.charCodeAt(m++);
//for Cipher Block Chaining mode, xor the message with the previous result
if (mode == 1) {if (encrypt) {left ^= cbcleft; right ^= cbcright;} else {cbcleft2 = cbcleft; cbcright2 = cbcright; cbcleft = left; cbcright = right;}}
//first each 64 but chunk of the message must be permuted according to IP
temp = ((left >>> 4) ^ right) & 0x0f0f0f0f; right ^= temp; left ^= (temp << 4);
temp = ((left >>> 16) ^ right) & 0x0000ffff; right ^= temp; left ^= (temp << 16);
temp = ((right >>> 2) ^ left) & 0x33333333; left ^= temp; right ^= (temp << 2);
temp = ((right >>> 8) ^ left) & 0x00ff00ff; left ^= temp; right ^= (temp << 8);
temp = ((left >>> 1) ^ right) & 0x55555555; right ^= temp; left ^= (temp << 1);
left = ((left << 1) | (left >>> 31));
right = ((right << 1) | (right >>> 31));
//do this either 1 or 3 times for each chunk of the message
for (j=0; j<iterations; j+=3) {
endloop = looping[j+1];
loopinc = looping[j+2];
//now go through and perform the encryption or decryption
for (i=looping[j]; i!=endloop; i+=loopinc) { //for efficiency
right1 = right ^ keys[i];
right2 = ((right >>> 4) | (right << 28)) ^ keys[i+1];
//the result is attained by passing these bytes through the S selection functions
temp = left;
left = right;
right = temp ^ (spfunction2[(right1 >>> 24) & 0x3f] | spfunction4[(right1 >>> 16) & 0x3f]
| spfunction6[(right1 >>> 8) & 0x3f] | spfunction8[right1 & 0x3f]
| spfunction1[(right2 >>> 24) & 0x3f] | spfunction3[(right2 >>> 16) & 0x3f]
| spfunction5[(right2 >>> 8) & 0x3f] | spfunction7[right2 & 0x3f]);
}
temp = left; left = right; right = temp; //unreverse left and right
} //for either 1 or 3 iterations
//move then each one bit to the right
left = ((left >>> 1) | (left << 31));
right = ((right >>> 1) | (right << 31));
//now perform IP-1, which is IP in the opposite direction
temp = ((left >>> 1) ^ right) & 0x55555555; right ^= temp; left ^= (temp << 1);
temp = ((right >>> 8) ^ left) & 0x00ff00ff; left ^= temp; right ^= (temp << 8);
temp = ((right >>> 2) ^ left) & 0x33333333; left ^= temp; right ^= (temp << 2);
temp = ((left >>> 16) ^ right) & 0x0000ffff; right ^= temp; left ^= (temp << 16);
temp = ((left >>> 4) ^ right) & 0x0f0f0f0f; right ^= temp; left ^= (temp << 4);
//for Cipher Block Chaining mode, xor the message with the previous result
if (mode == 1) {if (encrypt) {cbcleft = left; cbcright = right;} else {left ^= cbcleft2; right ^= cbcright2;}}
tempresult += String.fromCharCode ((left>>>24), ((left>>>16) & 0xff), ((left>>>8) & 0xff), (left & 0xff), (right>>>24), ((right>>>16) & 0xff), ((right>>>8) & 0xff), (right & 0xff));
chunk += 8;
if (chunk == 512) {result += tempresult; tempresult = ""; chunk = 0;}
} //for every 8 characters, or 64 bits in the message
//return the result as an array
return result + tempresult;
} //end of des
//des_createKeys
//this takes as input a 64 bit key (even though only 56 bits are used)
//as an array of 2 integers, and returns 16 48 bit keys
function des_createKeys (key) {
//declaring this locally speeds things up a bit
pc2bytes0 = new Array (0,0x4,0x20000000,0x20000004,0x10000,0x10004,0x20010000,0x20010004,0x200,0x204,0x20000200,0x20000204,0x10200,0x10204,0x20010200,0x20010204);
pc2bytes1 = new Array (0,0x1,0x100000,0x100001,0x4000000,0x4000001,0x4100000,0x4100001,0x100,0x101,0x100100,0x100101,0x4000100,0x4000101,0x4100100,0x4100101);
pc2bytes2 = new Array (0,0x8,0x800,0x808,0x1000000,0x1000008,0x1000800,0x1000808,0,0x8,0x800,0x808,0x1000000,0x1000008,0x1000800,0x1000808);
pc2bytes3 = new Array (0,0x200000,0x8000000,0x8200000,0x2000,0x202000,0x8002000,0x8202000,0x20000,0x220000,0x8020000,0x8220000,0x22000,0x222000,0x8022000,0x8222000);
pc2bytes4 = new Array (0,0x40000,0x10,0x40010,0,0x40000,0x10,0x40010,0x1000,0x41000,0x1010,0x41010,0x1000,0x41000,0x1010,0x41010);
pc2bytes5 = new Array (0,0x400,0x20,0x420,0,0x400,0x20,0x420,0x2000000,0x2000400,0x2000020,0x2000420,0x2000000,0x2000400,0x2000020,0x2000420);
pc2bytes6 = new Array (0,0x10000000,0x80000,0x10080000,0x2,0x10000002,0x80002,0x10080002,0,0x10000000,0x80000,0x10080000,0x2,0x10000002,0x80002,0x10080002);
pc2bytes7 = new Array (0,0x10000,0x800,0x10800,0x20000000,0x20010000,0x20000800,0x20010800,0x20000,0x30000,0x20800,0x30800,0x20020000,0x20030000,0x20020800,0x20030800);
pc2bytes8 = new Array (0,0x40000,0,0x40000,0x2,0x40002,0x2,0x40002,0x2000000,0x2040000,0x2000000,0x2040000,0x2000002,0x2040002,0x2000002,0x2040002);
pc2bytes9 = new Array (0,0x10000000,0x8,0x10000008,0,0x10000000,0x8,0x10000008,0x400,0x10000400,0x408,0x10000408,0x400,0x10000400,0x408,0x10000408);
pc2bytes10 = new Array (0,0x20,0,0x20,0x100000,0x100020,0x100000,0x100020,0x2000,0x2020,0x2000,0x2020,0x102000,0x102020,0x102000,0x102020);
pc2bytes11 = new Array (0,0x1000000,0x200,0x1000200,0x200000,0x1200000,0x200200,0x1200200,0x4000000,0x5000000,0x4000200,0x5000200,0x4200000,0x5200000,0x4200200,0x5200200);
pc2bytes12 = new Array (0,0x1000,0x8000000,0x8001000,0x80000,0x81000,0x8080000,0x8081000,0x10,0x1010,0x8000010,0x8001010,0x80010,0x81010,0x8080010,0x8081010);
pc2bytes13 = new Array (0,0x4,0x100,0x104,0,0x4,0x100,0x104,0x1,0x5,0x101,0x105,0x1,0x5,0x101,0x105);
//how many iterations (1 for des, 3 for triple des)
var iterations = key.length > 8 ? 3 : 1;
//stores the return keys
var keys = new Array (32 * iterations);
//now define the left shifts which need to be done
var shifts = new Array (0, 0, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 0);
//other variables
var lefttemp, righttemp, m=0, n=0, temp;
for (var j=0; j<iterations; j++) { //either 1 or 3 iterations
left = (key.charCodeAt(m++) << 24) | (key.charCodeAt(m++) << 16) | (key.charCodeAt(m++) << 8) | key.charCodeAt(m++);
right = (key.charCodeAt(m++) << 24) | (key.charCodeAt(m++) << 16) | (key.charCodeAt(m++) << 8) | key.charCodeAt(m++);
temp = ((left >>> 4) ^ right) & 0x0f0f0f0f; right ^= temp; left ^= (temp << 4);
temp = ((right >>> -16) ^ left) & 0x0000ffff; left ^= temp; right ^= (temp << -16);
temp = ((left >>> 2) ^ right) & 0x33333333; right ^= temp; left ^= (temp << 2);
temp = ((right >>> -16) ^ left) & 0x0000ffff; left ^= temp; right ^= (temp << -16);
temp = ((left >>> 1) ^ right) & 0x55555555; right ^= temp; left ^= (temp << 1);
temp = ((right >>> 8) ^ left) & 0x00ff00ff; left ^= temp; right ^= (temp << 8);
temp = ((left >>> 1) ^ right) & 0x55555555; right ^= temp; left ^= (temp << 1);
//the right side needs to be shifted and to get the last four bits of the left side
temp = (left << 8) | ((right >>> 20) & 0x000000f0);
//left needs to be put upside down
left = (right << 24) | ((right << 8) & 0xff0000) | ((right >>> 8) & 0xff00) | ((right >>> 24) & 0xf0);
right = temp;
//now go through and perform these shifts on the left and right keys
for (var i=0; i < shifts.length; i++) {
//shift the keys either one or two bits to the left
if (shifts[i]) {left = (left << 2) | (left >>> 26); right = (right << 2) | (right >>> 26);}
else {left = (left << 1) | (left >>> 27); right = (right << 1) | (right >>> 27);}
left &= -0xf; right &= -0xf;
//now apply PC-2, in such a way that E is easier when encrypting or decrypting
//this conversion will look like PC-2 except only the last 6 bits of each byte are used
//rather than 48 consecutive bits and the order of lines will be according to
//how the S selection functions will be applied: S2, S4, S6, S8, S1, S3, S5, S7
lefttemp = pc2bytes0[left >>> 28] | pc2bytes1[(left >>> 24) & 0xf]
| pc2bytes2[(left >>> 20) & 0xf] | pc2bytes3[(left >>> 16) & 0xf]
| pc2bytes4[(left >>> 12) & 0xf] | pc2bytes5[(left >>> 8) & 0xf]
| pc2bytes6[(left >>> 4) & 0xf];
righttemp = pc2bytes7[right >>> 28] | pc2bytes8[(right >>> 24) & 0xf]
| pc2bytes9[(right >>> 20) & 0xf] | pc2bytes10[(right >>> 16) & 0xf]
| pc2bytes11[(right >>> 12) & 0xf] | pc2bytes12[(right >>> 8) & 0xf]
| pc2bytes13[(right >>> 4) & 0xf];
temp = ((righttemp >>> 16) ^ lefttemp) & 0x0000ffff;
keys[n++] = lefttemp ^ temp; keys[n++] = righttemp ^ (temp << 16);
}
} //for each iterations
//return the keys we've created
return keys;
} //end of des_createKeys
////////////////////////////// TEST //////////////////////////////
function stringToHex (s) {
var r = "";// 0x, ，
var hexes = new Array ("0","1","2","3","4","5","6","7","8","9","A","B","C","D","E","F");
for (var i=0; i<s.length; i++) {r += hexes [s.charCodeAt(i) >> 4] + hexes [s.charCodeAt(i) & 0xf];}
return r;
}
이 함 수 는 8 바이트 문자열 을 일반 DES 알고리즘 키 (즉 64 비트 이지 만 알고리즘 은 56 비트 만 사용) 로 받 아들 이거 나 24 바이트 문자열 을 3DES 알고리즘 키 로 받 아들 입 니 다.두 번 째 매개 변 수 는 암호 화 되 거나 복호화 할 정보 문자열 입 니 다.세 번 째 불 값 매개 변 수 는 정보 가 암호 화 되 었 는 지 복호화 되 었 는 지 설명 하 는 데 사용 된다.다음 선택 가능 한 매개 변수 mode 가 0 이면 ECB 모드 를 표시 하고 1 은 CBC 모드 를 표시 하 며 기본 값 은 ECB 모드 입 니 다.마지막 옵션 은 8 바이트 의 입력 벡터 문자열 입 니 다 (ECB 모드 에 서 는 사용 하지 않 음).돌아 오 는 밀 문 은 문자열 입 니 다.
여기 서 저 는 3des 방법 을 봉 했 습 니 다. 3des 의 규정 에 따라 key 는 24 바이트 가 되 어야 합 니 다. 그래서 들 어 오 는 key 가 24 바이트 가 부족 하면 스스로 보완 해 야 합 니 다. 보완 하 는 규칙 은 낮은 위치 에서 0 을 보충 하 는 것 입 니 다.
function triple_des(key, message) {
for (var i = key.length; i<24; i++) {
key+="0";
}
return des(key, message, 1, 0, 0, 1);
}
// 3des des ， stringToHex
alert(stringToHex(triple_des("key", "hello123")));
이 내용에 흥미가 있습니까?
현재 기사가 여러분의 문제를 해결하지 못하는 경우 AI 엔진은 머신러닝 분석(스마트 모델이 방금 만들어져 부정확한 경우가 있을 수 있음)을 통해 가장 유사한 기사를 추천합니다:
다양한 언어의 JSONJSON은 Javascript 표기법을 사용하여 데이터 구조를 레이아웃하는 데이터 형식입니다. 그러나 Javascript가 코드에서 이러한 구조를 나타낼 수 있는 유일한 언어는 아닙니다. 저는 일반적으로 '객체'{}...
텍스트를 자유롭게 공유하거나 복사할 수 있습니다.하지만 이 문서의 URL은 참조 URL로 남겨 두십시오.
CC BY-SA 2.5, CC BY-SA 3.0 및 CC BY-SA 4.0에 따라 라이센스가 부여됩니다.
좋은 웹페이지 즐겨찾기
