tomcat 실행 제어 스 크 립 트 catalina. sh 분석
22676 단어 tomcat각본catalina.sh
tomcat 버 전: 6.0.35
#!/bin/sh
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# -----------------------------------------------------------------------------
# Start/Stop Script for the CATALINA Server
#
# Environment Variable Prerequisites
#
# CATALINA_HOME May point at your Catalina "build" directory.
#
# CATALINA_BASE (Optional) Base directory for resolving dynamic portions
# of a Catalina installation. If not present, resolves to
# the same directory that CATALINA_HOME points to.
#
# CATALINA_OUT (Optional) Full path to a file where stdout and stderr
# will be redirected.
# Default is $CATALINA_BASE/logs/catalina.out
#
# CATALINA_OPTS (Optional) Java runtime options used when the "start",
# or "run" command is executed.
#
# CATALINA_TMPDIR (Optional) Directory path location of temporary directory
# the JVM should use (java.io.tmpdir). Defaults to
# $CATALINA_BASE/temp.
#
# JAVA_HOME Must point at your Java Development Kit installation.
# Required to run the with the "debug" argument.
#
# JRE_HOME Must point at your Java Development Kit installation.
# Defaults to JAVA_HOME if empty.
#
# JAVA_OPTS (Optional) Java runtime options used when the "start",
# "stop", or "run" command is executed.
#
# JAVA_ENDORSED_DIRS (Optional) Lists of of colon separated directories
# containing some jars in order to allow replacement of APIs
# created outside of the JCP (i.e. DOM and SAX from W3C).
# It can also be used to update the XML parser implementation.
# Defaults to $CATALINA_HOME/endorsed.
#
# JPDA_TRANSPORT (Optional) JPDA transport used when the "jpda start"
# command is executed. The default is "dt_socket".
#
# JPDA_ADDRESS (Optional) Java runtime options used when the "jpda start"
# command is executed. The default is 8000.
#
# JPDA_SUSPEND (Optional) Java runtime options used when the "jpda start"
# command is executed. Specifies whether JVM should suspend
# execution immediately after startup. Default is "n".
#
# JPDA_OPTS (Optional) Java runtime options used when the "jpda start"
# command is executed. If used, JPDA_TRANSPORT, JPDA_ADDRESS,
# and JPDA_SUSPEND are ignored. Thus, all required jpda
# options MUST be specified. The default is:
#
# -agentlib:jdwp=transport=$JPDA_TRANSPORT,
# address=$JPDA_ADDRESS,server=y,suspend=$JPDA_SUSPEND
#
# CATALINA_PID (Optional) Path of the file which should contains the pid
# of catalina startup java process, when start (fork) is used
#
# LOGGING_CONFIG (Optional) Override Tomcat's logging config file
# Example (all one line)
# LOGGING_CONFIG="-Djava.util.logging.config.file=$CATALINA_BASE/conf/logging.properties"
#
# LOGGING_MANAGER (Optional) Override Tomcat's logging manager
# Example (all one line)
# LOGGING_MANAGER="-Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager"
#
# $Id: catalina.sh 1146097 2011-07-13 15:25:05Z markt $
# -----------------------------------------------------------------------------
export JRE_HOME=/usr/java/jdk1.6.0_38
export CATALINA_HOME=/home/xrltest1/tomcat
JAVA_OPTS="-server -Xms2048m -Xmx2048m -Xmn768m -XX:PermSize=128m -XX:MaxPermSize=256m -XX:+UseParallelOldGC -XX:+PrintGCDateStamps -XX:+PrintGCDetails -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath=/home/xrltest1/tomcat/dumpfile/heap.bin -Xloggc:/home/xrltest1/tomcat/logs/gc.log"
#作者添加的环境申明，如果一台服务器中有多台tomcat要使用不同版本的JVM，就可以直接这这边添加JRE_HOME，不需要再/etc/profile.d中再配置JRE_HOME环境变量
# OS specific support. $var _must_ be set to either true or false.
#此处语句判断操作系统，同时对操作系统支持
#os400是 IBM的AIX
#darwin是MacOSX 操作环境的操作系统成份
#Darwin是windows平台上运行的类UNIX模拟环境
cygwin=false
os400=false
darwin=false
case "`uname`" in
CYGWIN*) cygwin=true;;
OS400*) os400=true;;
Darwin*) darwin=true;;
esac
# resolve links - $0 may be a softlink
#此处的RPG抓取的是文件名，因为可能是符号链接，所以下面循环语句的作用就是找到文件真实源路径
PRG="$0"
while [ -h "$PRG" ]; do
ls=`ls -ld "$PRG"`
link=`expr "$ls" : '.*-> \(.*\)$'`
if expr "$link" : '/.*' > /dev/null; then
PRG="$link"
else
PRG=`dirname "$PRG"`/"$link"
fi
done
#获取脚本目录真实目录地址
# Get standard environment variables
PRGDIR=`dirname "$PRG"`
# Only set CATALINA_HOME if not already set
[ -z "$CATALINA_HOME" ] && CATALINA_HOME=`cd "$PRGDIR/.." >/dev/null; pwd`
# Copy CATALINA_BASE from CATALINA_HOME if not already set
[ -z "$CATALINA_BASE" ] && CATALINA_BASE="$CATALINA_HOME"
#上面两个语句判断变量$CATALINA_HOME和$CATALINA_BASE是否存在，不存在则给予附值
#CATALINA_BASE="$CATALINA_HOME"
# Ensure that any user defined CLASSPATH variables are not used on startup,
# but allow them to be specified in setenv.sh, in rare case when it is needed.
CLASSPATH=
#test �Cr File 文件存在并且可读
if [ -r "$CATALINA_BASE/bin/setenv.sh" ]; then
. "$CATALINA_BASE/bin/setenv.sh"
elif [ -r "$CATALINA_HOME/bin/setenv.sh" ]; then
. "$CATALINA_HOME/bin/setenv.sh"
fi
#默认的tomcat的bin目录下没有这个文件，可以自行编写setenv.sh这个文件设定环境变量
# For Cygwin, ensure paths are in UNIX format before anything is touched
if $cygwin; then
[ -n "$JAVA_HOME" ] && JAVA_HOME=`cygpath --unix "$JAVA_HOME"`
[ -n "$JRE_HOME" ] && JRE_HOME=`cygpath --unix "$JRE_HOME"`
[ -n "$CATALINA_HOME" ] && CATALINA_HOME=`cygpath --unix "$CATALINA_HOME"`
[ -n "$CATALINA_BASE" ] && CATALINA_BASE=`cygpath --unix "$CATALINA_BASE"`
[ -n "$CLASSPATH" ] && CLASSPATH=`cygpath --path --unix "$CLASSPATH"`
fi
# For OS400
if $os400; then
# Set job priority to standard for interactive (interactive - 6) by using
# the interactive priority - 6, the helper threads that respond to requests
# will be running at the same priority as interactive jobs.
COMMAND='chgjob job('$JOBNAME') runpty(6)'
system $COMMAND
# Enable multi threading
export QIBM_MULTI_THREADED=Y
fi
# Get standard Java environment variables
if $os400; then
# -r will Only work on the os400 if the files are:
# 1. owned by the user
# 2. owned by the PRIMARY group of the user
# this will not work if the user belongs in secondary groups
BASEDIR="$CATALINA_HOME"
. "$CATALINA_HOME"/bin/setclasspath.sh
else
#这点一定要注意了，本脚本中没有赋值却突然冒出的变量
#都是在setclasspath.sh这个脚本中执行赋值的。比如$_RUNJAVA
#作者会在下一篇文章中，分析setclasspath.sh这个脚本
if [ -r "$CATALINA_HOME"/bin/setclasspath.sh ]; then
BASEDIR="$CATALINA_HOME"
. "$CATALINA_HOME"/bin/setclasspath.sh
else
echo "Cannot find $CATALINA_HOME/bin/setclasspath.sh"
echo "This file is needed to run this program"
exit 1
fi
fi
#以上是出现在其他操作环境下的脚本的可用性设置，因默认linux系统，上面就不做解读了
if [ -z "$CATALINA_BASE" ] ; then
CATALINA_BASE="$CATALINA_HOME"
fi
#将变量赋值
# Add tomcat-juli.jar and bootstrap.jar to classpath
# tomcat-juli.jar can be over-ridden per instance
if [ ! -z "$CLASSPATH" ] ; then
CLASSPATH="$CLASSPATH":
fi
#虽然前面已将做出CATALINA_BASE="$CATALINA_HOME"的语句
#此处还是添加了判断，增强了代码的健壮性
#添加变量$CLASSPATH的值
if [ "$CATALINA_BASE" != "$CATALINA_HOME" ] && [ -r "$CATALINA_BASE/bin/tomcat-juli.jar" ] ; then
CLASSPATH="$CLASSPATH""$CATALINA_BASE"/bin/tomcat-juli.jar:"$CATALINA_HOME"/bin/bootstrap.jar
else
CLASSPATH="$CLASSPATH""$CATALINA_HOME"/bin/bootstrap.jar
fi
#确认日志路径$CATALINA_OUT
#这部分主要判断这些变量是否预定义，有就以预定义为主，没有就设置为默认格式
if [ -z "$CATALINA_OUT" ] ; then
CATALINA_OUT="$CATALINA_BASE"/logs/catalina.out
fi
if [ -z "$CATALINA_TMPDIR" ] ; then
# Define the java.io.tmpdir to use for Catalina
CATALINA_TMPDIR="$CATALINA_BASE"/temp
fi
# Bugzilla 37848: When no TTY is available, don't output to console
#获取当前shell运行的终端设备
have_tty=0
if [ "`tty`" != "not a tty" ]; then
have_tty=1
fi
# For Cygwin, switch paths to Windows format before running java
if $cygwin; then
JAVA_HOME=`cygpath --absolute --windows "$JAVA_HOME"`
JRE_HOME=`cygpath --absolute --windows "$JRE_HOME"`
CATALINA_HOME=`cygpath --absolute --windows "$CATALINA_HOME"`
CATALINA_BASE=`cygpath --absolute --windows "$CATALINA_BASE"`
CATALINA_TMPDIR=`cygpath --absolute --windows "$CATALINA_TMPDIR"`
CLASSPATH=`cygpath --path --windows "$CLASSPATH"`
JAVA_ENDORSED_DIRS=`cygpath --path --windows "$JAVA_ENDORSED_DIRS"`
fi
# Set juli LogManager config file if it is present and an override has not been issued
#确认$LOGGING_CONFIG变量
if [ -z "$LOGGING_CONFIG" ]; then
if [ -r "$CATALINA_BASE"/conf/logging.properties ]; then
LOGGING_CONFIG="-Djava.util.logging.config.file=$CATALINA_BASE/conf/logging.properties"
else
# Bugzilla 45585
LOGGING_CONFIG="-Dnop"
fi
fi
#确认$LOGGING_MANAGER变量
if [ -z "$LOGGING_MANAGER" ]; then
JAVA_OPTS="$JAVA_OPTS -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager"
else
JAVA_OPTS="$JAVA_OPTS $LOGGING_MANAGER"
fi
# ----- Execute The Requested Command -----------------------------------------
# Bugzilla 37848: only output this if we have a TTY
#正常情况下have_tty=1
if [ $have_tty -eq 1 ]; then
echo "Using CATALINA_BASE: $CATALINA_BASE"
echo "Using CATALINA_HOME: $CATALINA_HOME"
echo "Using CATALINA_TMPDIR: $CATALINA_TMPDIR"
if [ "$1" = "debug" ] ; then
echo "Using JAVA_HOME: $JAVA_HOME"
else
echo "Using JRE_HOME: $JRE_HOME"
fi
echo "Using CLASSPATH: $CLASSPATH"
#以下这句判断设置的$CATALINA_PID变量如果不存在，则显示"Using CATALINA_PID: $CATALINA_PID"，如果存在则不显示
if [ ! -z "$CATALINA_PID" ]; then
echo "Using CATALINA_PID: $CATALINA_PID"
fi
fi
#以上就是在启动tomcat是输出的环境变量信息
#
#获取第一次参数，jpda在后面的说明为：jpda start Start Catalina under JPDA debugger
if [ "$1" = "jpda" ] ; then
if [ -z "$JPDA_TRANSPORT" ]; then
JPDA_TRANSPORT="dt_socket"
fi
if [ -z "$JPDA_ADDRESS" ]; then
JPDA_ADDRESS="8000"
fi
if [ -z "$JPDA_SUSPEND" ]; then
JPDA_SUSPEND="n"
fi
if [ -z "$JPDA_OPTS" ]; then
JPDA_OPTS="-agentlib:jdwp=transport=$JPDA_TRANSPORT,address=$JPDA_ADDRESS,server=y,suspend=$JPDA_SUSPEND"
fi
CATALINA_OPTS="$CATALINA_OPTS $JPDA_OPTS"
shift
fi
#JPDA 模式是开启远程debug模式，端口就是JPDA_ADDRESS,生产环境用不到，不去深入
#这个是debug模式
#值得注意的是变量$_RUNJDB，居然在全文没有找到赋值的语句。
#从这边开始就注意了，里面的if-fi判断很多，一定要先调好格式再看
if [ "$1" = "debug" ] ; then
if $os400; then
echo "Debug command not available on OS400"
exit 1
else
shift
if [ "$1" = "-security" ] ; then
if [ $have_tty -eq 1 ]; then
echo "Using Security Manager"
fi
shift
exec "$_RUNJDB" "$LOGGING_CONFIG" $JAVA_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$JAVA_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-sourcepath "$CATALINA_HOME"/../../java \
-Djava.security.manager \
-Djava.security.policy=="$CATALINA_BASE"/conf/catalina.policy \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.apache.catalina.startup.Bootstrap "$@" start
else
exec "$_RUNJDB" "$LOGGING_CONFIG" $JAVA_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$JAVA_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-sourcepath "$CATALINA_HOME"/../../java \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.apache.catalina.startup.Bootstrap "$@" start
fi
fi
#上面语句是适配AIX环境的，不做解读
#当参数是debug时
elif [ "$1" = "run" ]; then
shift
#当使用shift命令之后，原来的$2会变成$1，并且原有的$1变得不可用，通过$#命令获得的参数个数也会少1
#这样就可以使用$1获取第二个参数
if [ "$1" = "-security" ] ; then
if [ $have_tty -eq 1 ]; then
echo "Using Security Manager"
fi
shift
#作废掉前两个参数
exec "$_RUNJAVA" "$LOGGING_CONFIG" $JAVA_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$JAVA_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-Djava.security.manager \
-Djava.security.policy=="$CATALINA_BASE"/conf/catalina.policy \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.apache.catalina.startup.Bootstrap "$@" start
else
exec "$_RUNJAVA" "$LOGGING_CONFIG" $JAVA_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$JAVA_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.apache.catalina.startup.Bootstrap "$@" start
#这个命令其实就是java命令，指定org.apache.catalina.startup.Bootstrap 这个class文件，$@和"start"作用类似于传参到前面的安格class里
fi
#正式进入启动的过程啦~
elif [ "$1" = "start" ] ; then
if [ ! -z "$CATALINA_PID" ]; then
#test �Cz 字符串 字符串的长度为零 ,判断这个变量或者文件内有数据
if [ -f "$CATALINA_PID" ]; then
#-f 该『文件名』是否为文件(file)？(常用)
if [ -s "$CATALINA_PID" ]; then
#-s 侦测该文件名是否为『非空白文件』？
echo "Existing PID file found during start."
if [ -r "$CATALINA_PID" ]; then
#-r 侦测该文件名是否具有『可读』的属性？
#以上if语句主要判断这个$CATALINA_PID，是否能正常可读
PID=`cat "$CATALINA_PID"`
ps -p $PID >/dev/null 2>&1
if [ $? -eq 0 ] ; then
#判断这个ＰＩＤ现在有没有被占用，有就输出这个tomcat依旧在运行，退出
#上面这段语句功能非常好，可以判断出这个PID是否还在运行
echo "Tomcat appears to still be running with PID $PID. Start aborted."
exit 1
else
echo "Removing/clearing stale PID file."
rm -f "$CATALINA_PID" >/dev/null 2>&1
#删除了这个$CATALINA_PID文件
if [ $? != 0 ]; then
if [ -w "$CATALINA_PID" ]; then
#-w 侦测该文件名是否具有『可写』的属性？
cat /dev/null > "$CATALINA_PID"
#清空$CATALINA_PID文件
else
#如果不具有可写权限，则输出信息，退出
echo "Unable to remove or clear stale PID file. Start aborted."
exit 1
fi
fi
fi
else
#如果"$CATALINA_PID"没有可读权限，任然输出信息退出。
echo "Unable to read PID file. Start aborted."
exit 1
fi
else
#"$CATALINA_PID"是空白文件
rm -f "$CATALINA_PID" >/dev/null 2>&1
#强制删除$CATALINA_PID文件
if [ $? != 0 ]; then
#成功则进行判断，没有读权限则退出脚本
if [ ! -w "$CATALINA_PID" ]; then
echo "Unable to remove or write to empty PID file. Start aborted."
exit 1
fi
fi
fi
fi
fi
#这段语句，主要目的就是清空$CATALINA_PID文件，如果出现不可读写，则输出信息退出
shift
#作废掉前面参数，$1将表示第二个参数
touch "$CATALINA_OUT"
#创建$CATALINA_OUT变量路径文件
if [ "$1" = "-security" ] ; then
#如果第二个参数是-security
if [ $have_tty -eq 1 ]; then
echo "Using Security Manager"
fi
shift
"$_RUNJAVA" "$LOGGING_CONFIG" $JAVA_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$JAVA_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-Djava.security.manager \
-Djava.security.policy=="$CATALINA_BASE"/conf/catalina.policy \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.apache.catalina.startup.Bootstrap "$@" start \
>> "$CATALINA_OUT" 2>&1 &
else
#我们平时执行启动tomcat核心就是这一句了
#
"$_RUNJAVA" "$LOGGING_CONFIG" $JAVA_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$JAVA_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.apache.catalina.startup.Bootstrap "$@" start \
>> "$CATALINA_OUT" 2>&1 &
#从&可以看出启动的命令在后台启动
fi
if [ ! -z "$CATALINA_PID" ]; then
#判断CATALINA_PID如果不是空字符，则将Shell最后运行的后台Process的PID 传给$CATALINA_PID
echo $! > "$CATALINA_PID"
#在使用命令运行进程至后台时，可以使用$!抓取前面启动运行在后台进程的进程号
fi
fi
#下面开始了tomcat停止模块了
elif [ "$1" = "stop" ] ; then
shift
SLEEP=5
if [ ! -z "$1" ]; then
echo $1 | grep "[^0-9]" >/dev/null 2>&1
if [ $? -gt 0 ]; then
SLEEP=$1
shift
fi
fi
#上面语句主要是判断停止语句执行到此时，设定几秒后再执行停止语句
#用来配合stop n
FORCE=0
if [ "$1" = "-force" ]; then
shift
FORCE=1
fi
#如果参数中使用了-force，则FORCE=1
if [ ! -z "$CATALINA_PID" ]; then
#$CATALINA_PID文件不是非空
if [ -f "$CATALINA_PID" ]; then
if [ -s "$CATALINA_PID" ]; then
kill -0 `cat "$CATALINA_PID"` >/dev/null 2>&1
#kill -0 pid 不发送任何信号，但是系统会进行错误检查。
if [ $? -gt 0 ]; then
echo "PID file found but no matching process was found. Stop aborted."
exit 1
fi
else
echo "PID file is empty and has been ignored."
fi
else
echo "\$CATALINA_PID was set but the specified file does not exist. Is Tomcat running? Stop aborted."
exit 1
fi
fi
#以上脚本是进行停止命令检错的，如果可能停止不了，则可以直接报错
"$_RUNJAVA" $JAVA_OPTS \
-Djava.endorsed.dirs="$JAVA_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.apache.catalina.startup.Bootstrap "$@" stop
#这个就是停止脚本的核心命令了
if [ ! -z "$CATALINA_PID" ]; then
if [ -f "$CATALINA_PID" ]; then
while [ $SLEEP -ge 0 ]; do
kill -0 `cat "$CATALINA_PID"` >/dev/null 2>&1
if [ $? -gt 0 ]; then
rm -f "$CATALINA_PID" >/dev/null 2>&1
if [ $? != 0 ]; then
if [ -w "$CATALINA_PID" ]; then
cat /dev/null > "$CATALINA_PID"
else
echo "Tomcat stopped but the PID file could not be removed or cleared."
fi
fi
break
fi
if [ $SLEEP -gt 0 ]; then
sleep 1
fi
if [ $SLEEP -eq 0 ]; then
if [ $FORCE -eq 0 ]; then
echo "Tomcat did not stop in time. PID file was not removed."
fi
fi
SLEEP=`expr $SLEEP - 1 `
done
fi
fi
#上段语句主要是清空$CATALINA_PID
#值得注意的是，生产环境偶尔不加-force选项，tomcat有时无法停止下来
#如果参数带"-force" ，则强制kill掉tomcat
if [ $FORCE -eq 1 ]; then
if [ -z "$CATALINA_PID" ]; then
echo "Kill failed: \$CATALINA_PID not set"
else
if [ -f "$CATALINA_PID" ]; then
PID=`cat "$CATALINA_PID"`
echo "Killing Tomcat with the PID: $PID"
kill -9 $PID
#强制执行的核心命令
rm -f "$CATALINA_PID" >/dev/null 2>&1
if [ $? != 0 ]; then
echo "Tomcat was killed but the PID file could not be removed."
fi
fi
fi
fi
#查看版本参数
elif [ "$1" = "version" ] ; then
"$_RUNJAVA" \
-classpath "$CATALINA_HOME/lib/catalina.jar" \
org.apache.catalina.util.ServerInfo
else
echo "Usage: catalina.sh ( commands ... )"
echo "commands:"
if $os400; then
echo " debug Start Catalina in a debugger (not available on OS400)"
echo " debug -security Debug Catalina with a security manager (not available on OS400)"
else
echo " debug Start Catalina in a debugger"
echo " debug -security Debug Catalina with a security manager"
fi
echo " jpda start Start Catalina under JPDA debugger"
echo " run Start Catalina in the current window"
echo " run -security Start in the current window with security manager"
echo " start Start Catalina in a separate window"
echo " start -security Start in a separate window with security manager"
echo " stop Stop Catalina, waiting up to 5 seconds for the process to end"
echo " stop n Stop Catalina, waiting up to n seconds for the process to end"
echo " stop -force Stop Catalina, wait up to 5 seconds and then use kill -KILL if still running"
echo " stop n -force Stop Catalina, wait up to n seconds and then use kill -KILL if still running"
echo " version What version of tomcat are you running?"
echo "Note: Waiting for the process to end and use of the -force option require that \$CATALINA_PID is defined"
exit 1
fi요약 하면 catalina. sh 스 크 립 트 는 대량의 판단 을 사 용 했 습 니 다. if 를 매개 변수 로 입력 하여 판단 합 니 다. 핵심 적 인 시작 명령 은 자바 명령 입 니 다.tomcat 시작 이상 이 발생 하면 catalina. sh 가 완료 되 었 을 때 문제 가 발생 했 는 지, catalina. sh 가 시작 되 었 을 때 이상 이 발생 했 는 지, 더 깊이 파고 들 고 싶 은 파트너 가 있 으 면 자바 를 배 워 서 JVM 조정 과 장벽 에서 더 멀리 갈 수 있 습 니 다.
이 내용에 흥미가 있습니까?
현재 기사가 여러분의 문제를 해결하지 못하는 경우 AI 엔진은 머신러닝 분석(스마트 모델이 방금 만들어져 부정확한 경우가 있을 수 있음)을 통해 가장 유사한 기사를 추천합니다:
EC2 인스턴스에 Tomcat 설치전제 조건: Amazon 계정이 있어야 합니다. Amazon 계정에 로그인하고 EC2 인스턴스를 시작합니다. 여기에서 프리 티어를 선택했고 Amazon Linux 2를 실행하는 EC2 인스턴스를 시작했습니다. 시작 ...
텍스트를 자유롭게 공유하거나 복사할 수 있습니다.하지만 이 문서의 URL은 참조 URL로 남겨 두십시오.
CC BY-SA 2.5, CC BY-SA 3.0 및 CC BY-SA 4.0에 따라 라이센스가 부여됩니다.
좋은 웹페이지 즐겨찾기
