INFO: task bonnie++:31785 blocked for more than 120 seconds

When running some high workloads on UEK kernels on systems with a lot of memory you might see the following errors in/var/log/messages:
 
INFO: task bonnie++:31785 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
bonnie++      D ffff810009004420     0 31785  11051               11096 (NOTLB)
ffff81021c771aa8 0000000000000082 ffff81103e62ccc0 ffffffff88031cb3
ffff810ac94cd6c0 0000000000000007 ffff810220347820 ffffffff80310b60
00016803dfd77991 00000000001312ee ffff810220347a08 0000000000000001
Call Trace:
[<ffffffff88031cb3>] :jbd:do_get_write_access+0x4f9/0x530
[<ffffffff800ce675>] zone_statistics+0x3e/0x6d
[<ffffffff88032002>] :jbd:start_this_handle+0x2e5/0x36c
[<ffffffff800a28b4>] autoremove_wake_function+0x0/0x2e
[<ffffffff88032152>] :jbd:journal_start+0xc9/0x100
[<ffffffff88050362>] :ext3:ext3_write_begin+0x9a/0x1cc
[<ffffffff8000fda3>] generic_file_buffered_write+0x14b/0x675
[<ffffffff80016679>] __generic_file_aio_write_nolock+0x369/0x3b6
[<ffffffff80021850>] generic_file_aio_write+0x65/0xc1
[<ffffffff8804c1b6>] :ext3:ext3_file_write+0x16/0x91
[<ffffffff800182df>] do_sync_write+0xc7/0x104
[<ffffffff800a28b4>] autoremove_wake_function+0x0/0x2e
[<ffffffff80062ff0>] thread_return+0x62/0xfe
[<ffffffff80016a81>] vfs_write+0xce/0x174
[<ffffffff80017339>] sys_write+0x45/0x6e
[<ffffffff8005d28d>] tracesys+0xd5/0xe0

This is a know bug. By default Linux uses up to 40% of the available memory for file system caching. After this mark has been reached the file system flushes all outstanding data to disk causing all following IOs going synchronous. For flushing out this data to disk this there is a time limit of 120 seconds by default. In the case here the IO subsystem is not fast enough to flush the data withing 120 seconds. This especially happens on systems with a lof of memory.
The problem is solved in later kernels and there is not “fix” from Oracle. I fixed this by lowering the mark for flushing the cache from 40% to 10% by setting “vm.dirty_ratio=10″ in/etc/sysctl.conf. This setting does not influence overall database performance since you hopefully use Direct IO and bypass the file system cache completely.

좋은 웹페이지 즐겨찾기