HyperLedger Fabric 실전 - 5, Fabric Solo 멀티태스킹

이번 편은 지난'Fabric Solo 단기 다중 노드 배치'의 확장으로 여러 대의 물리 서버에 배치되고 각 노드 인증서 파일, 창세 블록, 채널 가맹 파일 등은 모두 지난편의 내용을 사용할 것이다.

1. 네트워크 토폴로지

솔로 다중기 다중 노드 배치는 최소 두 대의 서버, 한 대의Orderer 정렬 서비스 노드, 한 대의peer 노드가 필요합니다. 새로 추가된 한 대의 추가 서버는 모두 새로운peer 노드로 가입할 수 있습니다.
다음 사례는 5개의 서버를 이용하여Fabric Solo 그룹 네트워크 작업을 테스트할 것이다.
Fabric 네트워크 환경에 관하여: 1) Peer 노드 서버가 저장 공간에 대한 소모가 비교적 크다.2) Fabric 1.1 버전은 CouchDB를 최적화하여 공간적 측면에서 더욱 우호적이다.3) HyperLedger Fabric 1.0 버전의 목표는 1000TPS이며 실험실 데이터는 이미 300~400TPS에 이르렀다.노드 서버는 대략 200TPS 이상입니다.4) 대량의 데이터를 가져오는 경우 Orderer 및 Peer 구성은 가져오는 동안 컨테이너가 다운되어 데이터가 손실되지 않도록 16C + 16G부터 시작하는 것이 좋습니다.
네트워크를 구성하기 전에 다섯 대의 서버에 모두Fabric의 운행 환경을 설치하고fabric/아래에aberic 폴더를 프로젝트 디렉터리로 새로 만들어야 합니다.
미러링 기능이 있으면 먼저 서버 1대를 만들고 다른 서버로 미러링할 수 있습니다.

2. Orderer 노드 배포

aberic/docker-orderer.yaml

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

version: '2'

services:

  orderer.example.com:
    container_name: orderer.example.com
    image: hyperledger/fabric-orderer
    environment:
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic_default
      # - ORDERER_GENERAL_LOGLEVEL=error
      - ORDERER_GENERAL_LOGLEVEL=debug
      - ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
      - ORDERER_GENERAL_LISTENPORT=7050
      #- ORDERER_GENERAL_GENESISPROFILE=AntiMothOrdererGenesis
      - ORDERER_GENERAL_GENESISMETHOD=file
      - ORDERER_GENERAL_GENESISFILE=/var/hyperledger/orderer/orderer.genesis.block
      - ORDERER_GENERAL_LOCALMSPID=OrdererMSP
      - ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp
      #- ORDERER_GENERAL_LEDGERTYPE=ram
      #- ORDERER_GENERAL_LEDGERTYPE=file
      # enabled TLS
      - ORDERER_GENERAL_TLS_ENABLED=false
      - ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric
    command: orderer
    volumes:
    - ./channel-artifacts/genesis.block:/var/hyperledger/orderer/orderer.genesis.block
    - ./crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/msp:/var/hyperledger/orderer/msp
    - ./crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/:/var/hyperledger/orderer/tls
    networks:
      default:
        aliases:
          - aberic
    ports:
      - 7050:7050

docker-compose -f docker-orderer.yaml up -d

3. peer0 배포.org1 노드

aberic/docker-peer01.yaml

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

version: '2'

services:

  couchdb:
    container_name: couchdb
    image: hyperledger/fabric-couchdb
    # Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
    # for example map it to utilize Fauxton User Interface in dev environments.
    ports:
      - 5984:5984

  ca:
    container_name: ca
    image: hyperledger/fabric-ca
    environment:
      - FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
      - FABRIC_CA_SERVER_CA_NAME=ca
      - FABRIC_CA_SERVER_TLS_ENABLED=false
      - FABRIC_CA_SERVER_TLS_CERTFILE=/etc/hyperledger/fabric-ca-server-config/ca.org1.example.com-cert.pem
      - FABRIC_CA_SERVER_TLS_KEYFILE=/etc/hyperledger/fabric-ca-server-config/ab7dca5e5f6b1cc24c2023764c5b34d1f78d8614d2a11e74178d2d5509bd3be8_sk
    ports:
      - 7054:7054
    command: sh -c 'fabric-ca-server start --ca.certfile /etc/hyperledger/fabric-ca-server-config/ca.org1.example.com-cert.pem --ca.keyfile /etc/hyperledger/fabric-ca-server-config/ab7dca5e5f6b1cc24c2023764c5b34d1f78d8614d2a11e74178d2d5509bd3be8_sk -b admin:adminpw -d'
    volumes:
      - ./crypto-config/peerOrganizations/org1.example.com/ca/:/etc/hyperledger/fabric-ca-server-config

  peer0.org1.example.com:
    container_name: peer0.org1.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
      - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984

      - CORE_PEER_ID=peer0.org1.example.com
      - CORE_PEER_NETWORKID=aberic
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_CHAINCODELISTENADDRESS=peer0.org1.example.com:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # the following setting starts chaincode containers on the same
      # bridge network as the peers
      # https://docs.docker.com/compose/networking/
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic_default
      - CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
      - CORE_PEER_GOSSIP_USELEADERELECTION=true
      - CORE_PEER_GOSSIP_ORGLEADER=false
      - CORE_PEER_PROFILE_ENABLED=false
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
    volumes:
      - /var/run/:/host/var/run/
      - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp:/etc/hyperledger/fabric/msp
      - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls:/etc/hyperledger/fabric/tls
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053
    depends_on:
      - couchdb
    networks:
      default:
        aliases:
          - aberic
    extra_hosts:
     - "orderer.example.com:172.31.159.130"

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/[email protected]/msp
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    volumes:
        - /var/run/:/host/var/run/
        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/aberic/chaincode/go
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
    depends_on:
      - peer0.org1.example.com
    extra_hosts:
     - "orderer.example.com:172.31.159.130"
     - "peer0.org1.example.com:172.31.143.22"

docker-compose -f docker-peer01.yaml up -d

시작이 완료되면 채널을 조작하여 네트워크를 구성합니다.

docker exec -it cli bash
peer channel create -o orderer.example.com:7050 -c mychannel -t 50s -f ./channel-artifacts/mychannel.tx
peer channel join -b mychannel.block

스마트 계약 설치

peer chaincode install -n mychannel -p github.com/hyperledger/fabric/aberic/chaincode/go/chaincode_example02 -v 1.0

실례화 chaincode

peer chaincode instantiate -o orderer.example.com:7050 -C mychannel -n mychannel -c '{"Args":["init","A","10","B","10"]}' -P "OR ('Org1MSP.member')" -v 1.0

A 계정 자산 조회

peer chaincode query -C mychannel -n mychannel -c '{"Args":["query","A"]}'

B 계정 자산 조회

peer chaincode query -C mychannel -n mychannel -c '{"Args":["query","B"]}'

계좌이체

peer chaincode invoke -C mychannel -n mychannel -c '{"Args":["invoke","A","B","5"]}'

이로써 peer0.org1은 이미 배치가 완료되었습니다.

4. 배포peer1.org1 노드

abeeric/docker-peer11.yaml

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

version: '2'

services:

  couchdb:
    container_name: couchdb
    image: hyperledger/fabric-couchdb
    # Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
    # for example map it to utilize Fauxton User Interface in dev environments.
    ports:
      - 5984:5984

  ca:
    container_name: ca
    image: hyperledger/fabric-ca
    environment:
      - FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
      - FABRIC_CA_SERVER_CA_NAME=ca
      - FABRIC_CA_SERVER_TLS_ENABLED=false
      - FABRIC_CA_SERVER_TLS_CERTFILE=/etc/hyperledger/fabric-ca-server-config/ca.org1.example.com-cert.pem
      - FABRIC_CA_SERVER_TLS_KEYFILE=/etc/hyperledger/fabric-ca-server-config/ab7dca5e5f6b1cc24c2023764c5b34d1f78d8614d2a11e74178d2d5509bd3be8_sk
    ports:
      - 7054:7054
    command: sh -c 'fabric-ca-server start --ca.certfile /etc/hyperledger/fabric-ca-server-config/ca.org1.example.com-cert.pem --ca.keyfile /etc/hyperledger/fabric-ca-server-config/ab7dca5e5f6b1cc24c2023764c5b34d1f78d8614d2a11e74178d2d5509bd3be8_sk -b admin:adminpw -d'
    volumes:
      - ./crypto-config/peerOrganizations/org1.example.com/ca/:/etc/hyperledger/fabric-ca-server-config

  peer1.org1.example.com:
    container_name: peer1.org1.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
      - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984

      - CORE_PEER_ID=peer1.org1.example.com
      - CORE_PEER_NETWORKID=aberic
      - CORE_PEER_ADDRESS=peer1.org1.example.com:7051
      - CORE_PEER_CHAINCODELISTENADDRESS=peer1.org1.example.com:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # the following setting starts chaincode containers on the same
      # bridge network as the peers
      # https://docs.docker.com/compose/networking/
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic_default
      - CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
      - CORE_PEER_GOSSIP_USELEADERELECTION=true
      - CORE_PEER_GOSSIP_ORGLEADER=false
      - CORE_PEER_PROFILE_ENABLED=false
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
    volumes:
        - /var/run/:/host/var/run/
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/msp:/etc/hyperledger/fabric/msp
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls:/etc/hyperledger/fabric/tls
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053
    depends_on:
      - couchdb
    networks:
      default:
        aliases:
          - aberic
    extra_hosts:
     - "orderer.example.com:172.31.159.130"

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer1.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/ca.crt
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/[email protected]/msp
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    volumes:
        - /var/run/:/host/var/run/
        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/aberic/chaincode/go
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
    depends_on:
      - peer1.org1.example.com
    extra_hosts:
     - "orderer.example.com:172.31.159.130"
     - "peer1.org1.example.com:172.31.143.23"

docker-compose -f docker-peer11.yaml up -d

후속은 기존 채널에 가입해 테스트 스마트 계약을 설치하는 것이다.
가입은 mychannel로 해야 합니다.block 파일은 입구입니다. 이 파일은peer0에 있습니다.org1 호스트 cli 용기의/opt/gopath/src/github.com/hyperledger/fabric/peer 디렉토리에 있습니다.

cd ~/fabric/aberic
docker cp :/opt/gopath/src/github.com/hyperledger/fabric/peer/mychannel.block ./channel-artifacts/

mychannel을.블록 파일을peer1로 복사합니다.org1 호스트 ~/fabric/aberic/channel-artifacts 디렉터리에서 peer1에 로그인합니다.org1 호스트.

cd ~/fabric/aberic
docker cp ./channel-artifacts/mychannel.block :/opt/gopath/src/github.com/hyperledger/fabric/peer/

피어1.org1 물리기에서 cli 용기에 들어가고 채널에 가입하기

docker exec -it cli bash
peer channel join -b mychannel.block
peer chaincode install -n mychannel -p github.com/hyperledger/fabric/aberic/chaincode/go/chaincode_example02 -v 1.0

설치 완료 후 다시 실례화 체인코드를 진행하면 바로 조회할 수 있습니다.

peer chaincode query -C mychannel -n mychannel -c '{"Args":["query","A"]}'

5, Peer0 배포.org2 노드

aberic/docker-peer02.yaml

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

version: '2'

services:

  couchdb:
    container_name: couchdb
    image: hyperledger/fabric-couchdb
    # Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
    # for example map it to utilize Fauxton User Interface in dev environments.
    ports:
      - 5984:5984

  ca:
    container_name: ca
    image: hyperledger/fabric-ca
    environment:
      - FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
      - FABRIC_CA_SERVER_CA_NAME=ca
      - FABRIC_CA_SERVER_TLS_ENABLED=false
      - FABRIC_CA_SERVER_TLS_CERTFILE=/etc/hyperledger/fabric-ca-server-config/ca.org2.example.com-cert.pem
      - FABRIC_CA_SERVER_TLS_KEYFILE=/etc/hyperledger/fabric-ca-server-config/638c62f6073cf84d4a897b90fa31c0d53c4c2ffaa0b0be1c3c7df233eb33a27a_sk
    ports:
      - 7054:7054
    command: sh -c 'fabric-ca-server start --ca.certfile /etc/hyperledger/fabric-ca-server-config/ca.org2.example.com-cert.pem --ca.keyfile /etc/hyperledger/fabric-ca-server-config/638c62f6073cf84d4a897b90fa31c0d53c4c2ffaa0b0be1c3c7df233eb33a27a_sk -b admin:adminpw -d'
    volumes:
      - ./crypto-config/peerOrganizations/org2.example.com/ca/:/etc/hyperledger/fabric-ca-server-config

  peer0.org2.example.com:
    container_name: peer0.org2.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
      - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984

      - CORE_PEER_ID=peer0.org2.example.com
      - CORE_PEER_NETWORKID=aberic
      - CORE_PEER_ADDRESS=peer0.org2.example.com:7051
      - CORE_PEER_CHAINCODELISTENADDRESS=peer0.org2.example.com:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org2.example.com:7051
      - CORE_PEER_LOCALMSPID=Org2MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # the following setting starts chaincode containers on the same
      # bridge network as the peers
      # https://docs.docker.com/compose/networking/
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic_default
      - CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
      - CORE_PEER_GOSSIP_USELEADERELECTION=true
      - CORE_PEER_GOSSIP_ORGLEADER=false
      - CORE_PEER_PROFILE_ENABLED=false
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
    volumes:
        - /var/run/:/host/var/run/
        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/msp:/etc/hyperledger/fabric/msp
        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls:/etc/hyperledger/fabric/tls
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053
    depends_on:
      - couchdb
    networks:
      default:
        aliases:
          - aberic
    extra_hosts:
     - "orderer.example.com:172.31.159.130"

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer0.org2.example.com:7051
      - CORE_PEER_LOCALMSPID=Org2MSP
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/[email protected]/msp
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    volumes:
        - /var/run/:/host/var/run/
        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/aberic/chaincode/go
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
    depends_on:
      - peer0.org2.example.com
    extra_hosts:
     - "orderer.example.com:172.31.159.130"
     - "peer0.org2.example.com:172.31.159.129"

6. Peer1 배포.org2 노드

aberic/docker-peer12.yaml 시작 파일

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

version: '2'

services:

  couchdb:
    container_name: couchdb
    image: hyperledger/fabric-couchdb
    # Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
    # for example map it to utilize Fauxton User Interface in dev environments.
    ports:
      - "5984:5984"

  ca:
    container_name: ca
    image: hyperledger/fabric-ca
    environment:
      - FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
      - FABRIC_CA_SERVER_CA_NAME=ca
      - FABRIC_CA_SERVER_TLS_ENABLED=false
      - FABRIC_CA_SERVER_TLS_CERTFILE=/etc/hyperledger/fabric-ca-server-config/ca.org2.example.com-cert.pem
      - FABRIC_CA_SERVER_TLS_KEYFILE=/etc/hyperledger/fabric-ca-server-config/638c62f6073cf84d4a897b90fa31c0d53c4c2ffaa0b0be1c3c7df233eb33a27a_sk
    ports:
      - "7054:7054"
    command: sh -c 'fabric-ca-server start --ca.certfile /etc/hyperledger/fabric-ca-server-config/ca.org2.example.com-cert.pem --ca.keyfile /etc/hyperledger/fabric-ca-server-config/638c62f6073cf84d4a897b90fa31c0d53c4c2ffaa0b0be1c3c7df233eb33a27a_sk -b admin:adminpw -d'
    volumes:
      - ./crypto-config/peerOrganizations/org2.example.com/ca/:/etc/hyperledger/fabric-ca-server-config

  peer1.org2.example.com:
    container_name: peer1.org2.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
      - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984

      - CORE_PEER_ID=peer1.org2.example.com
      - CORE_PEER_NETWORKID=aberic
      - CORE_PEER_ADDRESS=peer1.org2.example.com:7051
      - CORE_PEER_CHAINCODELISTENADDRESS=peer1.org2.example.com:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org2.example.com:7051
      - CORE_PEER_LOCALMSPID=Org2MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # the following setting starts chaincode containers on the same
      # bridge network as the peers
      # https://docs.docker.com/compose/networking/
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic_default
      - CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
      - CORE_PEER_GOSSIP_USELEADERELECTION=true
      - CORE_PEER_GOSSIP_ORGLEADER=false
      - CORE_PEER_PROFILE_ENABLED=false
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
    volumes:
        - /var/run/:/host/var/run/
        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/msp:/etc/hyperledger/fabric/msp
        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls:/etc/hyperledger/fabric/tls
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053
    depends_on:
      - couchdb
    networks:
      default:
        aliases:
          - aberic
    extra_hosts:
     - "orderer.example.com:172.31.159.130"

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer1.org2.example.com:7051
      - CORE_PEER_LOCALMSPID=Org2MSP
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/ca.crt
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/[email protected]/msp
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    volumes:
        - /var/run/:/host/var/run/
        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/aberic/chaincode/go
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
    depends_on:
      - peer1.org2.example.com
    extra_hosts:
     - "orderer.example.com:172.31.159.130"
     - "peer1.org2.example.com:172.31.143.21"

프로필은 기본적으로 일치하는데, 주요 차이점은 peer 노드의 ip와 MSPID 값이 다르다는 것이다.