How to activate Serial Console on Debian Squeeze

1483 단어



July 6, 2011, 
Christian Kildau,  5 Comments
Activating a Serial Console starting at the bootloader all the way up to a tty login requires just a few steps, but it took me some time to figure out all the knobs. Here’s how to do it with Debian Squeeze:
To have configruation changes persistent in Debian, you may not edit/boot/grub/grub.cfg directly, but need to edit/add the appropiate lines in/etc/defaults/grub:
1
2
3
GRUB_CMDLINE_LINUX_DEFAULT="console=tty0 console=ttyS0,9600n8"
GRUB_TERMINAL=console
GRUB_SERIAL_COMMAND="serial --speed=9600 --unit=0 --word=8 --parity=no --stop=1"

Now run  update-grub  and you’ll get the Bootloader and all Kernel and Init messages on your serial console the next time you boot.
To get a login promt on serial you need to modify/etc/inittab to:
1
2
3
4
5
6
7
8
1:2345:respawn:/sbin/getty 38400 tty1
2:23:respawn:/sbin/getty 38400 tty2
3:23:respawn:/sbin/getty 38400 tty3
4:23:respawn:/sbin/getty 38400 tty4
5:23:respawn:/sbin/getty 38400 tty5
6:23:respawn:/sbin/getty 38400 tty6
# Serial console
s0:2345:respawn:/sbin/getty -L 9600 ttyS0 vt102

That’s it. run  init q  to reload init and activate serial login, or simply reboot.

좋은 웹페이지 즐겨찾기